Oak herringbone flooring

Oak herringbone costs €95 to €130 a m² supplied and fitted in engineered oak and €110 to €160 a m² in solid oak. Solid blocks are €39 to €168 a m² unfinished before fitting, and they are sanded and oiled on site.

Solid against engineered oak: what each costs fitted, how thick the blocks are and how often they can be sanded.

Free and no obligation. Your request goes to one fitter in your county, not a list.

  • €95–€130 a m²engineered oak, fitted
  • €110–€160 a m²solid oak, fitted
  • €39–€168 a m²solid blocks, unfinished
  • 20–22 mmtypical solid block thickness
Close-up of a warm brown oak herringbone floor

Solid or engineered oak

Engineered oak

Thickness
15 to 20 mm for blocks, 14 to 15 mm for boards
Supplied and fitted
€95 to €130 a m²
In the room before fitting
48 to 72 hours
Sanding
At least twice with a 4 mm wear layer
Over underfloor heating
Yes, with limits

Solid oak

Thickness
20 to 22 mm for blocks
Supplied and fitted
€110 to €160 a m²
In the room before fitting
At least 7 days
Sanding
Many times
Over underfloor heating
Less suitable

Both are oak on the surface. The choice is about how often you want to sand it and whether the floor sits over heating.

Price your herringbone floor

Three taps and the price shows as you go. Your name and number come last, and only if you want a fitter to price it.

Engineered wood herringbone, 20 to 40 m², supplied and fitted: €1,900 to €5,200.

Step 1 of 5

What floor are you after?

Pick the closest. The fitter asks the rest.

How the price is worked out

The figure is what Irish sellers and fitters charge a square metre, times the area you pick. Engineered wood is the supplied-and-fitted range. Laminate and vinyl add fitting at plank rates, so herringbone adds to them. Tile is the tile only. Where nobody publishes a figure, it reads priced on a visit. Use it to plan with. It isn't a quote: a fitter prices yours after seeing the floor.

Domestic block sizes

The usual domestic blocks are 70 × 280 mm and 90 × 360 mm. Engineered blocks are 15 to 20 mm thick and solid blocks 20 to 22 mm. Thinner solid blocks, about 10 mm, are also sold, and the price range above takes them in. Block sizes.

How solid oak is laid

  • Glued down. Solid blocks are not floated or nailed. A flexible adhesive is trowelled in sections and each block is tapped home.
  • Set out from the middle. Chalk lines through the centre of the room, and a dry run toward each wall.
  • Sanded after the glue cures. About a day later, through finer grits, then two coats of hardwax oil.

All of it, in order: fitting herringbone flooring.

Oak and underfloor heating

Engineered oak can go over underfloor heating if it settles in the room with the heating running before it is fitted. Solid parquet is less suitable. Glued fitting suits a heated floor. Underfloor heating.

Questions before you buy

How much is oak herringbone flooring?

Oak herringbone costs €95 to €130 a m² supplied and fitted in engineered oak and €110 to €160 a m² in solid oak. Solid blocks are €39 to €168 a m² unfinished before fitting, and they are sanded and oiled on site.

Which oak herringbone is cheaper to fit?

Engineered, at €95 to €130 a m² against €110 to €160 a m² for solid, both supplied and fitted.

How thick is a solid oak herringbone block?

20 to 22 mm for the usual domestic block. Thinner ones of about 10 mm are sold as well.

Can solid oak herringbone go over underfloor heating?

It is less suitable than engineered. Ask the fitter and the maker before you order.

How many times can oak herringbone be sanded?

Solid oak many times. Engineered with a 4 mm wear layer at least twice.

Everything on this site

A large bright room with a light herringbone oak floor and arched alcoves

See the price before anyone rings

Pick the floor, how big it is and where you live. When you want a firm price, it goes to a single floor fitter in your county.