Herringbone flooring with underfloor heating

Engineered wood, laminate and vinyl herringbone are all listed as compatible with underfloor heating, and glued fitting suits a heated floor. The floor surface is usually held to 27°C or less, and some makers set a lower limit. Solid parquet is less suitable.

Which herringbone suits a heated floor, how it is fixed and how to bring the heat up.

Free and no obligation. Your request goes to one fitter in your county, not a list.

  • 27°Cusual limit at the floor surface
  • a day or twoheating off after fitting
  • 15–18°Cwhere it restarts
  • 2–3°Cthe daily rise after that
A bedroom with a dark herringbone floor

Which herringbone suits a heated floor

Compatible

Engineered wood
Yes, glued or floated
Laminate
Listed as compatible
Vinyl and LVT
Listed as compatible, some sold as suitable
Solid parquet
Less suitable

Check closely

Engineered wood
Settle it with the heating running before fitting
Laminate
Check the maker's limit
Vinyl and LVT
Check the underlay and the limit
Solid parquet
Ask the fitter and the maker

Always read the maker's guidance for the floor you buy. It sets the temperature limit and the underlay.

Price your herringbone floor

Three taps and the price shows as you go. Your name and number come last, and only if you want a fitter to price it.

Engineered wood herringbone, 20 to 40 m², supplied and fitted: €1,900 to €5,200.

Step 1 of 5

What floor are you after?

Pick the closest. The fitter asks the rest.

How the price is worked out

The figure is what Irish sellers and fitters charge a square metre, times the area you pick. Engineered wood is the supplied-and-fitted range. Laminate and vinyl add fitting at plank rates, so herringbone adds to them. Tile is the tile only. Where nobody publishes a figure, it reads priced on a visit. Use it to plan with. It isn't a quote: a fitter prices yours after seeing the floor.

Fixing it

Glued fitting is the one fitters describe as great with underfloor heating, because the floor is bonded to the subfloor and heat passes straight in. A floated floor over an underlay can work too, and the underlay then matters for even heat. Check the maker's guidelines first.

Heating it up

  1. Leave it off. Keep the heating off for a day or two after the floor is fitted.
  2. Restart low. Begin at about 15 to 18°C at the floor surface.
  3. Raise it slowly. Add 2 to 3°C a day until you reach the working temperature.
  4. Stay under the limit. The floor surface is usually kept to 27°C at most, and some makers set a lower figure.
  5. After a long shutdown. If it has been off for more than a week, bring it back the same gradual way.

The screed has to be dry

Moisture testing is a must on a screed with heating in it. A cement screed is tested at up to 75% relative humidity on an in-situ hygrometer, or 2% on a carbide test, and often 1.8% where heating runs in it. An anhydrite screed is tested at up to 65% relative humidity. Some floors need lower readings, so the maker's figure comes first.

Moisture and flatness for any floor: fitting herringbone flooring.

Questions before you buy

Can I put herringbone over underfloor heating?

Engineered wood, laminate and vinyl herringbone are all listed as compatible with underfloor heating, and glued fitting suits a heated floor. The floor surface is usually held to 27°C or less, and some makers set a lower limit. Solid parquet is less suitable.

What is the maximum floor temperature?

Usually 27°C at the floor surface. Some makers specify a lower limit.

Is engineered herringbone suitable for underfloor heating?

Yes. Glued fitting suits it, and the boards should settle in the room with the heating running before fitting.

Can vinyl herringbone go over underfloor heating?

Yes. It is listed as compatible, and some herringbone vinyl is sold as suitable. Check the maker's limit.

How do I turn the heating on after fitting?

Leave it off for a day or two, restart at about 15 to 18°C and raise it 2 to 3°C a day.

Everything on this site

A large bright room with a light herringbone oak floor and arched alcoves

See the price before anyone rings

Pick the floor, how big it is and where you live. When you want a firm price, it goes to a single floor fitter in your county.