Herringbone flooring, priced before anyone rings you
Engineered oak, solid oak, laminate, vinyl and tile in a herringbone pattern. See what each costs a square metre, what fitting adds and what your subfloor needs.
Free and no obligation. Your request goes to one fitter in your county, not a list.
- from €95 a m²engineered oak herringbone, supplied and fitted
- €27–€107 a m²herringbone laminate, to buy
- €25–€40 a m²what herringbone adds to the fitting
- 2 to 4 daysto lay a 30 m² room

Price your herringbone floor
Three taps and the price shows as you go. Your name and number come last, and only if you want a fitter to price it.
Engineered wood herringbone, 20 to 40 m², supplied and fitted: €1,900 to €5,200.
How the price is worked out
The figure is what Irish sellers and fitters charge a square metre, times the area you pick. Engineered wood is the supplied-and-fitted range. Laminate and vinyl add fitting at plank rates, so herringbone adds to them. Tile is the tile only. Where nobody publishes a figure, it reads priced on a visit. Use it to plan with. It isn't a quote: a fitter prices yours after seeing the floor.
Herringbone floors and what they cost
What each one sells for in Ireland now. Tap one for its sizes, what to check and how it is laid.

Engineered wood
from €56 a m²oak top layer, bought on its ownSee more →
Solid oak blocks
from €39 a m²unfinished blocks, 10 to 21 mm thickSee more →
Laminate
from €27 a m²click boards, 8 to 12 mm thickSee more →
Vinyl and LVT
from €48 a m²click vinyl, 4.5 to 5 mm thickSee more →
Tiles
from €18 a m²wood-effect porcelain, bought on its ownSee more →
Lino and sheet vinyl
from €13 a m²a 2 m wide roll, 2.3 mm thickSee more →- Lino and sheet vinylA wood-look roll at €13 to €15 a m²
- Carpet and stair runnersA stair runner is sold by the metre
- Grey herringboneThe colour, in every material
Prices to buy include VAT. Fitting is on top unless a price says supplied and fitted. Every material with worked examples: herringbone flooring cost.
Three steps, one fitter
1Price it herePick the floor, how big it is and where you live. You see our price as you tap, before the planner asks for anything.
2One fitter looks at the floorSend it and a single floor fitter in your county rings to arrange a visit. They test the subfloor, measure up and price the job in writing.
3It is laidA 30 m² room takes two to four days in herringbone. Fitters are usually booked two to six weeks ahead.
Which material?
The material sets the price, the thickness and what the floor can take.
- Engineered wood. A real oak top layer, usually 3 mm, on a stable core. €56 to €119 a m² to buy and €95 to €130 supplied and fitted.
- Solid oak. The classic block, 20 to 22 mm thick, glued down and sanded on site. €110 to €160 a m² supplied and fitted.
- Laminate. A printed wood look, €27 to €107 a m² to buy. Fitting planks is €10 to €12 a m², and herringbone costs more.
- Vinyl and LVT. A thin click floor that suits a kitchen. €48 to €67 a m² to buy and €15 to €20 a m² to click down.
- Tiles. Porcelain with a wood or stone look. €18 to €50 a m² to buy, laid by a tiler.
- Lino and sheet vinyl. A 2 m wide roll at €13 to €15 a m², with no joins across a small room.
Each one side by side, with what to ask a seller: the price guide.
Four checks before the first block
Herringbone is unforgiving of a bad subfloor. A fitter looks at these before pricing.
- Dry. Concrete should read under 6% moisture content and a timber subfloor under 16%. Test it before the boards come out of the packs.
- Flat. No dip of more than 2 mm in a metre. Low spots are filled with levelling compound.
- Settled. Engineered boards sit in the room in their packs for 48 to 72 hours. Solid wood needs at least 7 days.
- Room to move. A gap of 10 to 15 mm at every wall, door frame and pipe, covered by skirting or beading.
Order 10 to 20% more than the floor area for herringbone, against 5 to 10% for straight planks. Every piece at the walls is cut at an angle, and the off-cuts are triangles. All of it, step by step: fitting herringbone flooring.
Herringbone, chevron or parquet?
Three names that get mixed up. The difference is in the end of each block.
Herringbone
Rectangular blocks with straight ends, laid in a staggered zigzag. Each block sits at a right angle to its neighbour.
Chevron
Blocks cut at an angle so they meet in a true point. The zigzag runs in clean lines with no stagger.
Parquet
The wider family: blocks laid in a pattern. Herringbone is the most familiar, and the one this site is about.
What fitting adds
Herringbone takes longer to lay than a plank floor, and the price shows it.
- €25–€40a m² added to the fitting
- 2 to 4 daysto lay 30 m² in herringbone
- 10–20%extra material ordered for cuts
- 10–15%added to fitted prices in Dublin
A fitter lays herringbone for €25 to €40 a m² more than straight planks. In engineered oak that puts a supplied-and-fitted floor at €95 to €130 a m², with the oil finish in the price. In solid oak it is €110 to €160 a m². Dublin runs 10 to 15% higher. What a fitter should put in writing: what a good quote includes.
Fitting anywhere in Ireland
One fitter, in your county.
The planner asks for your county last, so your request goes to one floor fitter who covers your county. There is no list and no ring-round. A 30 m² room takes two to four days to lay in herringbone, against one to two days for straight planks. Fitters are usually booked two to six weeks ahead.
Dublin fitters price 10 to 15% above the fitted ranges on this site. Boards bought from a shop are delivered to the door, and some sellers charge for it.
What a good quote includes
Five things to see in writing before you say yes.
- The floor. Species and grade, thickness, wear layer and block size, written out.
- Supply, fit or both. Which of the three the price covers.
- The pattern. Herringbone named, not plank, with any border or feature strip.
- The extra boards. How many m² are ordered over the floor area for cuts.
- The subfloor. A moisture reading, any levelling, and whether they are in the price.
The other five, and why each matters: what a good quote includes.
Before you start
How much does herringbone flooring cost?
Herringbone flooring costs €95 to €130 a m² supplied and fitted in engineered oak and €110 to €160 a m² in solid oak. Bought on its own, engineered boards are €56 to €119 a m², laminate €27 to €107 a m², click vinyl €48 to €67 a m² and tiles €18 to €50 a m². Fitting herringbone adds €25 to €40 a m² to what straight planks cost to lay. The full price guide.
How much more is herringbone to fit than plank?
A fitter lays herringbone for €25 to €40 a m² more than straight planks. In engineered oak that puts a supplied-and-fitted floor at €95 to €130 a m², with the oil finish in the price. In solid oak it is €110 to €160 a m². Dublin runs 10 to 15% higher.
Which herringbone floor costs least?
Sheet vinyl at €13 to €15 a m² and laminate from €27 a m² cost least to buy. Solid oak blocks cost most once they are laid and finished: €110 to €160 a m².
Can herringbone go over underfloor heating?
Engineered wood, laminate and vinyl herringbone are listed as compatible, and glued fitting suits heated floors. Check the maker's limits first. Underfloor heating.
How much extra flooring do I order?
Order 10 to 20% more than the floor area for herringbone, against 5 to 10% for straight planks. Every piece at the walls is cut at an angle, and the off-cuts are triangles.
How long does it take to lay?
A 30 m² room takes two to four days to lay in herringbone, against one to two days for straight planks. Fitters are usually booked two to six weeks ahead.
Is herringbone the same as chevron?
No. Herringbone blocks have straight ends and stagger. Chevron blocks are cut at an angle and meet in a point. Herringbone or chevron.
Who rings me if I send my floor?
A single floor fitter in your county, who already has your answers and our price. Your details go nowhere else. The fitter looks at the floor, prices the job in writing, and you decide whether to go ahead.
Everything on this site
Floors by material
Costs and fitting
The pattern and where it goes

See the price before anyone rings
Pick the floor, how big it is and where you live. When you want a firm price, it goes to a single floor fitter in your county.
