Herringbone vinyl and LVT flooring

Herringbone vinyl costs €48 to €67 a m² to buy for click boards, and €15 to €20 a m² to click down on a prepared subfloor. Glued vinyl adds €5 to €10 a m² and preparing the subfloor €8 to €14 a m². Boards are 4.5 to 5 mm thick.

What click vinyl costs bought and fitted, how thick it is and what the subfloor adds.

Free and no obligation. Your request goes to one fitter in your county, not a list.

  • €48–€67 a m²click vinyl, to buy
  • €15–€20 a m²click fitting
  • €8–€14 a m²subfloor preparation
  • 4.5–5 mmboard thickness
A living room with a pale grey herringbone floor, a grey sofa and black chairs

Vinyl, LVT and SPC

These names cover a family of thin click floors with a wood look, cut into herringbone pieces. Luxury vinyl tile is LVT, and the rigid-core versions are SPC. Fitters recommend luxury vinyl for kitchens because it resists water.

Click vinyl floats over the subfloor. Glued vinyl is bonded down and adds to the fitting cost.

Price your herringbone floor

Three taps and the price shows as you go. Your name and number come last, and only if you want a fitter to price it.

Herringbone vinyl or LVT, 20 to 40 m², supplied and fitted: €1,260 to €3,480.

Step 1 of 5

What floor are you after?

Pick the closest. The fitter asks the rest.

How the price is worked out

The figure is what Irish sellers and fitters charge a square metre, times the area you pick. Engineered wood is the supplied-and-fitted range. Laminate and vinyl add fitting at plank rates, so herringbone adds to them. Tile is the tile only. Where nobody publishes a figure, it reads priced on a visit. Use it to plan with. It isn't a quote: a fitter prices yours after seeing the floor.

What comes in the box

12.5 × 75 cm2.25 m² a box4.5 mm, 24 tiles
120 × 720 mmleft and right boards5 mm, 0.55 mm wear layer
2.34 m²a packembossed finish

Some makers sell the herringbone as left and right boards, and you order both. Ask for the wear layer in millimetres before you order.

What fitting costs

Click vinyl, fitted

€15 to €20 a m²

On a prepared subfloor.

Glued vinyl

adds €5 to €10 a m²

Bonded to the subfloor, not floated.

Subfloor preparation

€8 to €14 a m²

Charged apart from the fitting.

Herringbone layout

priced on a visit

These are plank rates, so it costs more to lay in herringbone.

Vinyl in a wet room or kitchen

Vinyl is the usual pick where a floor gets wet, and it suits a kitchen. Subfloor preparation is priced apart from the fitting. Herringbone kitchen floors.

Questions before you buy

How much is herringbone vinyl flooring?

Herringbone vinyl costs €48 to €67 a m² to buy for click boards, and €15 to €20 a m² to click down on a prepared subfloor. Glued vinyl adds €5 to €10 a m² and preparing the subfloor €8 to €14 a m². Boards are 4.5 to 5 mm thick.

What is the difference between LVT and vinyl?

LVT is luxury vinyl tile, a thicker, harder-wearing vinyl cut into planks or tiles. SPC has a rigid core.

Can herringbone vinyl go over underfloor heating?

Yes. Listed as compatible, and some herringbone vinyl is sold as suitable. Check the maker's limit first.

Does vinyl need an underlay?

Some click vinyl comes with one attached, and some uses a separate underlay. The box says which.

How much extra vinyl do I order?

Order 10 to 20% more than the floor area for herringbone, against 5 to 10% for straight planks. Every piece at the walls is cut at an angle, and the off-cuts are triangles.

Everything on this site

A large bright room with a light herringbone oak floor and arched alcoves

See the price before anyone rings

Pick the floor, how big it is and where you live. When you want a firm price, it goes to a single floor fitter in your county.