What herringbone flooring costs in Ireland
Herringbone flooring costs €95 to €130 a m² supplied and fitted in engineered oak and €110 to €160 a m² in solid oak. Bought on its own, engineered boards are €56 to €119 a m², laminate €27 to €107 a m², click vinyl €48 to €67 a m² and tiles €18 to €50 a m². Fitting herringbone adds €25 to €40 a m² to what straight planks cost to lay.
Our price guide for every material, what fitting adds and what a subfloor costs to get right.
Free and no obligation. Your request goes to one fitter in your county, not a list.
- €95–€130 a m²engineered oak, supplied and fitted
- €110–€160 a m²solid oak, supplied and fitted
- €25–€40 a m²herringbone's extra over plank fitting
- €8–€14 a m²subfloor preparation

Our price guide
What each one sells for in Ireland now. Prices to buy include VAT.

Engineered wood
from €56 a m²oak top layer, bought on its own- Bought, a m²€56 to €119
- Supplied and fitted, a m²€95 to €130
- Herringbone fitting extra, a m²€25 to €40

Solid oak blocks
from €39 a m²unfinished blocks, 10 to 21 mm thick- Bought, a m²€39 to €168
- Supplied and fitted, a m²€110 to €160
- Sanding and refinishingpriced on a visit

Laminate
from €27 a m²click boards, 8 to 12 mm thick- Bought, a m²€27 to €107
- Fitting planks, a m²€10 to €12
- Herringbone extrapriced on a visit

Vinyl and LVT
from €48 a m²click vinyl, 4.5 to 5 mm thick- Bought, a m²€48 to €67
- Fitting click, a m²€15 to €20
- Subfloor preparation, a m²€8 to €14

Tiles
from €18 a m²wood-effect porcelain, bought on its own- Bought, a m²€18 to €50
- A tiler's lowest starting ratefrom €34 a m²
- Herringbone layingpriced on a visit

Lino and sheet vinyl
from €13 a m²a 2 m wide roll, 2.3 mm thick- Bought, a m²€13 to €15
- Fittingpriced on a visit
- Roll width2 m
Fitting, subfloor and the rest
Fitting herringbone, the extra
€25 to €40 a m²
On top of what straight planks cost to lay. The reason is more labour time and more waste.
Subfloor preparation
€8 to €14 a m²
Levelling and priming before a floor goes down. It is charged apart from the fitting.
Fitting laminate planks
€10 to €12 a m²
A plank rate. Herringbone costs more, and the fitter prices the difference.
Fitting click vinyl
€15 to €20 a m²
On a prepared subfloor. Glued vinyl adds €5 to €10 a m².
Underlay
from €1 a m²
For a floated floor. A glued floor does not need it.
A tiler's lowest starting rate
from €34 a m²
For a small, plain job. A herringbone layout takes longer than a straight grid.
What moves a price up or down
- The material. Solid oak costs more than engineered, engineered more than laminate, laminate more than vinyl.
- The subfloor. A flat, dry slab costs nothing extra. A dip, a damp patch or an old floor to lift does.
- The pattern. Herringbone and chevron cost more to lay than plank, and a border adds cuts.
- The finish. A price that includes two coats of oil is not the same as one that stops at bare boards.
- The area. Odd shapes, alcoves and many doorways mean more angled cuts and more waste.
- Where it is. Dublin runs 10 to 15% above the ranges here.
Price your herringbone floor
Three taps and the price shows as you go. Your name and number come last, and only if you want a fitter to price it.
Engineered wood herringbone, 20 to 40 m², supplied and fitted: €1,900 to €5,200.
How the price is worked out
The figure is what Irish sellers and fitters charge a square metre, times the area you pick. Engineered wood is the supplied-and-fitted range. Laminate and vinyl add fitting at plank rates, so herringbone adds to them. Tile is the tile only. Where nobody publishes a figure, it reads priced on a visit. Use it to plan with. It isn't a quote: a fitter prices yours after seeing the floor.
Seven jobs, priced
- A 15 m² bedroom in engineered oak, supplied and fitted: €1,425 to €1,950.
- A 30 m² living room in engineered oak, supplied and fitted: €2,850 to €3,900.
- A 50 m² open-plan floor in solid oak, supplied and fitted: €5,500 to €8,000.
- A 20 m² room in herringbone laminate, bought and fitted at plank rates: €740 to €2,380.
- A 20 m² room in click vinyl herringbone, bought and fitted at plank rates: €1,260 to €1,740.
- 12 m² of herringbone tiles, bought only: €216 to €600.
- Preparing the subfloor of a 20 m² room: €160 to €280.
Worked from the ranges above, not a quote. The planner on this page does the same sum for the floor you pick.
Engineered oak, supplied and fitted, by area
The oil finish is in these figures: two coats, put on after fitting. Dublin runs 10 to 15% higher, so a 30 m² floor there is €3,135 to €4,485.
Where the money goes
The boards or blocks
Material is the biggest swing. Laminate and vinyl start lower than oak. Engineered oak sits in the middle, and solid oak blocks cost most once they are laid, sanded and finished on site.
The fitting
Herringbone adds €25 to €40 a m² over plank. Laid across a 15 m² bedroom that is €375 to €600, and across 50 m² it is €1,250 to €2,000. Each block is measured and aligned, and the cut pieces at the walls are triangles.
The subfloor
A flat, dry slab needs nothing. Anything else is preparation, and it is the part of a quote that varies most from house to house. Fitting herringbone flooring.
The finish
Oiled floors are sanded after the glue cures and given two coats. A price that leaves it out is cheaper on paper.
How to spend less without regretting it
- Go engineered, not solid. A 3 mm top layer of real oak gives the look and costs less than a 20 mm block.
- Keep the room simple. Fewer alcoves and doorways means fewer angled cuts and less waste.
- Fix the subfloor once. Skimping on it is how a floor squeaks, lifts or gaps.
- Ask for the price per m² and the area. Two quotes only compare when both say how many m² they are for.
- Pick a material that suits the room. A kitchen or a hall that gets wet feet suits vinyl or tile better than solid oak.
What a good quote includes
Ten things to see in writing. They are what make two quotes comparable.
- The floor. Species and grade, thickness, wear layer and block size, written out.
- Supply, fit or both. Which of the three the price covers.
- The pattern. Herringbone named, not plank, with any border or feature strip.
- The extra boards. How many m² are ordered over the floor area for cuts.
- The subfloor. A moisture reading, any levelling, and whether they are in the price.
- Glue or float. The adhesive or underlay, and why that one.
- The finish. Oiled or lacquered, how many coats, and whether it is included.
- Skirting and thresholds. Refitted or new, and the doors trimmed to clear the floor.
- Uplift and disposal. Taking up the old floor, moving furniture and taking the waste away.
- The dates. When fitting starts and how many days it takes.
Questions before you buy
How much does herringbone flooring cost in Ireland?
Herringbone flooring costs €95 to €130 a m² supplied and fitted in engineered oak and €110 to €160 a m² in solid oak. Bought on its own, engineered boards are €56 to €119 a m², laminate €27 to €107 a m², click vinyl €48 to €67 a m² and tiles €18 to €50 a m². Fitting herringbone adds €25 to €40 a m² to what straight planks cost to lay.
How much is herringbone flooring a m² fitted?
Engineered oak is €95 to €130 a m² supplied and fitted, and solid oak €110 to €160 a m², with the oil finish in both. Dublin runs 10 to 15% higher.
Why is herringbone dearer to fit than plank?
It takes more labour time and more material waste. Each block is measured and aligned, and the extra comes to €25 to €40 a m².
How much does herringbone laminate cost?
€27 to €107 a m² to buy. Fitting planks is €10 to €12 a m², and a herringbone layout costs more to lay than that.
How much is herringbone vinyl?
€48 to €67 a m² to buy for click vinyl, and €15 to €20 a m² to click down on a prepared subfloor.
Do the prices include VAT?
Prices to buy are shown with VAT in. On a fitted quote, ask whether VAT is in the figure.
What does it cost to prepare the subfloor?
€8 to €14 a m², charged apart from fitting. A flat, dry slab needs none.
Is the finish included?
In the supplied-and-fitted figures for oak, yes: two coats of hardwax oil after fitting. Ask the same of any quote you compare.
Everything on this site
Floors by material
Costs and fitting
The pattern and where it goes

See the price before anyone rings
Pick the floor, how big it is and where you live. When you want a firm price, it goes to a single floor fitter in your county.
