Herringbone flooring questions, answered
Cost, materials, fitting, subfloors, heating and finishes, in one place.
Free and no obligation. Your request goes to one fitter in your county, not a list.
- €95–€130 a m²engineered oak, fitted
- €27–€107 a m²laminate, to buy
- 10–20%extra to order
- 2–4 daysto lay 30 m²
Price your herringbone floor
Three taps and the price shows as you go. Your name and number come last, and only if you want a fitter to price it.
Engineered wood herringbone, 20 to 40 m², supplied and fitted: €1,900 to €5,200.
How the price is worked out
The figure is what Irish sellers and fitters charge a square metre, times the area you pick. Engineered wood is the supplied-and-fitted range. Laminate and vinyl add fitting at plank rates, so herringbone adds to them. Tile is the tile only. Where nobody publishes a figure, it reads priced on a visit. Use it to plan with. It isn't a quote: a fitter prices yours after seeing the floor.
Every question
How much does herringbone flooring cost in Ireland?
Herringbone flooring costs €95 to €130 a m² supplied and fitted in engineered oak and €110 to €160 a m² in solid oak. Bought on its own, engineered boards are €56 to €119 a m², laminate €27 to €107 a m², click vinyl €48 to €67 a m² and tiles €18 to €50 a m². Fitting herringbone adds €25 to €40 a m² to what straight planks cost to lay.
How much does fitting herringbone cost?
A fitter lays herringbone for €25 to €40 a m² more than straight planks. In engineered oak that puts a supplied-and-fitted floor at €95 to €130 a m², with the oil finish in the price. In solid oak it is €110 to €160 a m². Dublin runs 10 to 15% higher.
How much is herringbone laminate?
€27 to €107 a m² to buy. Fitting planks is €10 to €12 a m², and herringbone costs more to lay.
How much is herringbone vinyl or LVT?
€48 to €67 a m² to buy for click vinyl, and €15 to €20 a m² to fit.
How much are herringbone tiles?
€18 to €50 a m² to buy. Laying a herringbone pattern is priced on a visit.
How much is solid oak parquet?
Unfinished blocks are €39 to €168 a m². Supplied and fitted in herringbone it is €110 to €160 a m².
How much extra flooring do I need?
Order 10 to 20% more than the floor area for herringbone, against 5 to 10% for straight planks. Every piece at the walls is cut at an angle, and the off-cuts are triangles.
How long does it take to lay herringbone?
A 30 m² room takes two to four days to lay in herringbone, against one to two days for straight planks. Fitters are usually booked two to six weeks ahead.
Can herringbone go over underfloor heating?
Engineered wood, laminate and vinyl herringbone are listed as compatible. The floor surface is usually kept to 27°C or less, and some makers set a lower limit.
What is the difference between herringbone and chevron?
Herringbone blocks have straight ends and sit staggered. Chevron blocks are cut at an angle and meet in a true point.
Is herringbone glued or floated?
Engineered herringbone can be floated, glued or nailed. Solid parquet blocks are glued down. Glued fitting suits underfloor heating.
What does the subfloor need?
A herringbone floor needs a dry, flat subfloor. Concrete should read under 6% moisture content and a timber subfloor under 16%. A dip of more than 2 mm in a metre is levelled before anything goes down.
How long do engineered boards sit in the room first?
48 to 72 hours for engineered boards, in their packs. Solid wood needs at least 7 days.
What gap do I leave at the walls?
Leave a 10 to 15 mm gap at every wall, door frame and pipe. Skirting or beading covers it.
Can engineered herringbone be sanded?
Yes. With a wear layer of 4 mm or more it can be refinished at least twice. Thinner layers allow once or twice.
Is herringbone good for a kitchen?
Vinyl and laminate are the usual choices where it gets wet. Flooring is normally the last trade in, after the units and before the skirting.
What happens after I send my floor?
A single floor fitter in your county, who already has your answers and our price. Your details go nowhere else. The fitter looks at the floor, prices the job in writing, and you decide whether to go ahead.
Everything on this site
Floors by material
Costs and fitting
The pattern and where it goes

See the price before anyone rings
Pick the floor, how big it is and where you live. When you want a firm price, it goes to a single floor fitter in your county.
